Effect of Contact Time on the Sorption of Metal Ions Associated with Produced Water on Pulverized Oyster Shell (OS) as Adsorbent

Nkanga, T.S.

Department of Pure and Industrial Chemistry, Faculty of Science, University of Port Harcourt, Rivers State, Nigeria.

Iwuoha, G. N. *

Department of Pure and Industrial Chemistry, Faculty of Science, University of Port Harcourt, Rivers State, Nigeria.

Onojake, M.C

Department of Pure and Industrial Chemistry, Faculty of Science, University of Port Harcourt, Rivers State, Nigeria.

*Author to whom correspondence should be addressed.


Abstract

The aim of this research is to investigate Metal ion sorption potentials of pulverized Oyster Shell as adsorbent in produced water from selected flow stations in the Niger Delta region of Nigeria. Produced water samples were collected from six (6) different oil drilling installations (CC7T, CC8T, WELL 2 GSS, WELL 8 TEB, AZUZUAMA ST 1, AZUZUAMA ST 2) around the Niger Delta area of Nigeria. The waste oyster shell was collected in Akpan-Andem Market in Uyo, Akwa-Ibom State and processed using well established protocols. Atomic Absorption Spectrometer (AAS) was used to determine selected metals’ Nickel (Ni), Cobalt (Co), Copper (Cu), Iron (Fe), Lead (Pb), Calcium (Ca) and Potassium (K) concentrations. The obtained values for Nickel ranged from 0.076mg/l at AZUZU-AMA ST1 flow station to 2.882 mg/l at WELL2-GSS flow station with average value of 0.745 mg/l. The obtained value for Cobalt ranged from ˂0.001 mg/l at CC-8T and CC-7T to 0.277 mg/l at AZUZUAMA ST1. Values obtained for Cu, Fe, Pb, Ca, and K ranged between: 0.195 mg/l at WELL2-GSS to 0.449 mg/l at AZUZU-AMA ST1; 2.785 mg/l to 89.279mg/l; ˂0.001 mg/l to 0.483 mg/l; 16.217 mg/l to 92.714 mg/l and 96.386 mg/l to 105.416 mg/l respectively. Generally, the amount of metal ions absorbed/adsorbed onto pulverized Oyster shell (OS) increased swiftly within 2 hours and slowly with further increase of contact time and then tended to be stable. For pulverized Oyster shell adsorbent, the adsorption/absorption capacity decreases with the increasing contact time.  The adsorbent (OS) isn’t good material for removal of Calcium and Cobalt in produced water but was very effective adsorbent for Ni, Fe, and Pb removal in produced water and less effective for Cu and K removal from produced water. The study underscores the need to further probe outcome of above research at different pH and other relevant variables as well as compares its efficiency with other detoxification technologies like Detoxification by chemical reaction (DCR) technology.

Keywords: Pulverized oyster shell, contact time, adsorption, produced water, DCR technology


How to Cite

T.S., N., G. N., I., & M.C, O. (2024). Effect of Contact Time on the Sorption of Metal Ions Associated with Produced Water on Pulverized Oyster Shell (OS) as Adsorbent. Journal of Global Ecology and Environment, 20(4), 136–145. https://doi.org/10.56557/jogee/2024/v20i48927

Downloads

Download data is not yet available.